Faucet & Sink Repair in Murrieta, CA
Dripping faucets, leaking supply lines, and clogged sinks repaired or replaced, usually the same day, with a flat price before we start.
A Drip That Seems Small Adds Up
A faucet dripping once every few seconds can waste a meaningful amount of water over a month, and it's one of the fastest, cheapest repairs we do. Most calls turn out to be a worn cartridge or washer, parts that cost little but get put off because the sink still works well enough day to day.
Signs Your Faucet Or Sink Needs Attention
A Persistent Drip
A faucet that drips even when fully closed usually means a worn cartridge, washer, or O-ring, cheap parts that get overlooked because the fixture still technically works.
Leaking Supply Lines Under The Sink
Moisture or corrosion on the supply lines under a sink is often a slow leak that's been building for a while before it's noticed.
Low Flow Or Sputtering Water
Reduced flow or sputtering at a single faucet usually points to mineral buildup inside the aerator or valve, not a whole-house pressure problem.
Loose Or Wobbly Faucet
A faucet that wobbles at the base often has a loose mounting nut, an easy fix before it stresses the supply connections.
Faucet Won't Stop Dripping?
Usually a same-day fix with parts stocked on the truck.
Repair Or Replacement, Diagnosed Honestly
For a dripping faucet, we check the cartridge, washer, and O-rings first, since those wear out fastest and are the cheapest to fix. For a leak under the sink, we trace it to the actual supply line, shutoff valve, or drain connection rather than just tightening the first fitting we see. On an older faucet where replacement parts are hard to source, we'll say so honestly rather than charging for a repair that won't hold.
Why Murrieta Faucets Wear Out Faster Than Expected
Hard water, commonly 10 to 25 grains per gallon depending on the district, accelerates mineral buildup inside faucet cartridges and aerators. That buildup is a direct, common cause of faucets here developing drips or reduced flow a few years before you'd expect based on the fixture's age alone. The same hardness is behind a lot of what we see on other fixtures too, which is part of why water softener installs often come up in the same conversation as a faucet repair.
When A New Faucet Makes More Sense
Usually Worth Repairing
- Worn cartridge, washer, or O-ring
- Loose mounting nut
- Fixture under about 10 years old
- Replacement parts still available
Usually Worth Replacing
- Discontinued model with no parts available
- Corroded or damaged body, not just internals
- Repeated repairs on the same fixture
- Wanting a different style or finish anyway
What This Typically Costs
Installation price includes removal of the old fixture and basic supply line hookup.
Common Questions
Tightening the handle doesn't fix a worn cartridge or washer, which is almost always the actual cause. It's a cheap, fast repair once diagnosed correctly.
It's worth addressing promptly. Even a slow leak can damage cabinetry and flooring over time if left unaddressed.
If parts are getting hard to source or you've had more than one repair on it, replacement is often the better value long-term.
Yes, including matching new supply lines and shutoff valves when needed.
Most installations, including removal of the old fixture, are completed in under two hours.
Yes, including Temecula, Wildomar, Lake Elsinore, Menifee, and Canyon Lake.
Leak Under The Sink?
We'll trace it to the real source before quoting a fix.
Often Booked Together
Also Serving
Faucet Or Sink Trouble?
Same-day repair and installation across Murrieta and the Temecula Valley.
☎ Call (951) 467-1450